PRO CARE GROUT SEALER is a water based, penetrating sealer especially formulated for grout which prevents mould and mildew growth. This product has a no-sheen, no surface film, natural look finish. PRO CARE GROUT SEALER is suitable for grout joints between ceramic, porcelain and natural stone tiles in showers, bathrooms, and kitchens. Suitable for use on wall and floor grout and interior and exterior applications.

DILUTION:

Use 500ml spray bottle as supplied.

PRODUCT APPLICATION:

• Shake well before use. For new installations, sealer can be applied as soon as 12 hours after grouting. Grout joints must be clean, dry, and free of existing sealers or coatings. Point nozzle toward the grout, keeping the nozzle 20 – 30 cm from the surface. Depress nozzle and spray on to grout lines with an even film. Avoid pooling and excess overspray. Some of the grout sealer will get onto the tiles. Excess sealer will evaporate without leaving any hard to remove residue. NOTE – any sealer that does not penetrate the surface can be removed with a dry cloth once the sealer is dry. If two or more coats are applied, allow a minimum of 30 minutes drying time between coats. May be re-applied as needed to grout joints that are clean.
• Ready for surface traffic 2 hours after final coat. Keep area dry for 12 hours. Full cure in 24 hours.

PRECAUTIONS & LIMITATIONS:

a. Ensure that the above instructions are adhered to at all times and do not adulterate the product in any way as this could cause failure.
b. Rubber gloves should be used when applying PRO CARE GROUT SEALER. In the event of contamination, rinse skin under cold water. Consult a doctor if irritation persists.
c. Keep PRO CARE GROUT SEALER away from pets and children.
d. Do not ingest.