BUY ONLINE
Purchase Products

 

HEAD TO A STORE
After 3 Business Hours

 

COLLECT IN STORE
We Will Have It Packed And Ready

Check “Stock availability” below to see if this item is available in your area.

 Check Stock Availability


Pro Grip Superior Tile Adhesive - 20 Kg

For All Ceramic Wall & Floor Tiles

EZAD100

R49.90
item(s)

  • PROGRIP SUPERIOR ADHESIVE® is a high strength cement based tile adhesive designed for installing ceramic, clay and cement tiles onto all types of cement based substrates and other pre-primed surfaces.
  • The adhesive covers between 2.2 and 3.8 m2 depending on application.
  • PROGRIP SUPERIOR ADHESIVE® is suitable for both wall and floor applications.
  • The price of this product may be more expensive in outlying stores due to transportation costs.
    • NB: Not suitable for Porcelain and Kilimanjaro tiles.

    View Data Sheet

    Application Wall & Floor
    Bag Size 20
    Bag Coverage 2.2 - 3.8
    Drying Time 24

    PURPOSE

    PRO GRIP SUPERIOR ADHESIVE® is a high strength cement based tile adhesive designed for installing ceramic, clay and cement tiles onto all types of cement based substrates and other pre-primed surfaces. PRO GRIP SUPERIOR ADHESIVE® is suitable for both wall and floor applications as well as interior and exterior applications.

     

    MIXING INSTRUCTIONS

    1. Add 5 litres of water to suitable container.

    2. Slowly add 20 kg of tile adhesive.

    3. Mixing with an electric drill and paddle will ensure thorough mixing.

    4. Mix to a creamy consistency.

    5. Use within 3 hours.

     

    SURFACE PREPARATION

    (These recommendations are in accordance with the SABS standard SANS 10107:2011 - The design and installation of ceramic tiles.)

    1. Ensure that surfaces to be tiled are sound (no cracks or crumbling), clean, free of dust, release agent, fungi, or any surface dampness. Fungi must be removed and the spores killed with the use of an effective fungicide. (a dilution of household bleach is sufficient)

    2. New walls and floors must be allowed to cure for minimum periods as listed below to ensure that movement due to shrinkage does not affect the installation

    a. Direct bedding onto new brick walls and concrete surfaces: 6 weeks

    b. New plaster walls: 2 weeks

    c. New screeded floors: 4 weeks *This guideline only serves as a basic manual for the surface preparation, product selection and installation procedure for this type of application. Each installation needs to be assessed on merits and the products used and the procedures followed should be in accordance with the SABS code for the design and installation of ceramic tiles (SABS 10107:2011).

     

    3. Very smooth surfaces such as steel trowelled and off-shutter concrete must be acid washed to remove laitance and then rinsed thoroughly with cold water. The surface must then be primed with a mixture consisting of two parts PRO GRIP BASECOAT ® mixed with one part PRO GRIP KEYCOAT ® and allowed to dry prior to tiling.

    4. Painted surfaces, gypsum plasters and surfaces that have old bitumen adhesive on them must be chipped in order to expose at least 80% of the substrate. The surface must then be primed with a mixture consisting of two parts PRO GRIP BASECOAT ® mixed with one part PRO GRIP KEYCOAT ® and allowed to dry prior to tiling.

    5. Highly porous substrates can negatively affect the bond strength of the tile adhesive. Check the porosity of the substrate by applying a small quantity of water. If the moisture is completely absorbed within one minute, then the surface is too porous and will need to be sealed with a mixture of two parts PRO GRIP BASECOAT ® mixed with one part PRO GRIP KEYCOAT ® and allowed to dry prior to tiling.

     

    APPLICATION

    Only apply sufficient adhesive to an area as can be tiled within 10 minutes. Use a suitable notched trowel to maintain a minimum bed height of 6-7 mm for floor tiling and 3-4 mm for wall tiling. The recommended trowels are as follows: Application

    Trowel Size (height x width x gap)

    Wall tiles

    6mm x 8mm x 5mm

    Floor tiles smaller than 400mm x 400 mm

    10mm x 10mm x 6mm

    Floor tiles larger than 400mm x 400

    17mm x 22mm x 6mm

    Order Online Skip the Queue and reserve your stock!

    Place your order online and we will source your stock at the nearest store with sufficient stock.

    We will have your order packed and ready for collection 3 business hours after your payment has cleared.

    This service is available in over 70 stores nationwide.

    Check “Stock availability” on the product of your choice to see if this item is available in your area.

    To speak to a product expert, please call 010 003 9987.

     

      Check Stock Availability

    Save Time, Buy it Online and have it Delivered!

    Home renovating products are heavy. Save yourself the backache and have your goods transported to your doorstep.

    To calculate the exact delivery cost for your area, add the products you would like to your quote, enter your address and place your order.
    We aim for next day delivery depending on stock availability.


    In the unlikely event that we are not able to supply your product in your area, we will contact you to discuss alternative solutions.

    To speak to a product expert, please call 010 003 9987.

    Easy 90-Day Hassle-Free Returns

    CTM supplies quality products to ensure your peace of mind.

    You have 90 days to return any unopened, unused products in their original sellable condition.

    We will gladly exchange or refund products provided that:

    The return date is within 90 days of purchase.
    You have valid proof of purchase (invoice) from CTM.
    Goods must be in their original sellable condition and packaging.
    Goods must be returned to your nearest CTM.

    Please ensure you are satisfied with the product before installing as returns will not be accepted after installation.